Three (3) Sgt 800 50hz.gas Turbine Generator Sets W/dle

Brand: Siemens
Industrial Turbomachinery Output Capacity: 47MW
Cycles: 50
Condition: New
Surplus Voltage: 10.5 kV/11.0 kV
Fuel Type: Dual Fuel
Vibration and temperature monitoring.
Abradable seals
Controlled diffusion airfoils
DLE burners in damped combustor
Welded annular sheet metal design.
Thermal-barrier-coated inner surface
Fuel System: Gas only or dual-fuel (gas/diesel).
On-load fuel changeover capability
Load-rejection capability.
Noise level options (85dB(A) standard)
Compressor cleaning options
Turbine: Single-module high-efficiency 3-stage turbine – two first stages and stator flanges are air-cooled – third stage with interlocking shrouds

Axial Compressor: 15-stage axial-flow compressor– 3 stages variable guide vanes Electron-beam welded rotor Cr-steel blades and vanes
Bearings: Tilting-pad radial and thrust bearings
Combustor and Emissions Control: DLE combustion system 30 dual-fuel
Speed Reduction Gearbox: Double helical design Cold-end-driven generator Speeds of 1,500 rpm and 1,800 rpm to suit 50 Hz or 60 Hz operation
Generator: Four-pole design Rated voltage: 10.5 kV/11.0 kV 50 Hz
Gas-supply pressure requirement: 27-30 bar(a) (390-435 psi(a)).
Protection IP54 PMG for excitation power supply
Complies with -IEC/EN 6034-1 standard
Lubrication: Lubricating oil system placed on separate skid (Classic Package), or integrated on GT-skid (Single Lift Package) 3×50% AC-driven lube oil pumps with DC backup Oil cooler and oil heaters
Starting: Electric VSD start-motor connected to the gearbox
Control System: Siemens Simatic control system
Distributed Inputs/Outputs Other: Straight axial exhaust Fire and gas detection equipment
Combustion air inlet filtration with options for static, pulse cleaning and HEPA Enclosure in carbon or stainless steel